クロスリージョンの TGW ピアリングと VPC ピアリングで Multipath Resilience を有効化してみた

クロスリージョンの TGW ピアリングと VPC ピアリングで Multipath Resilience を有効化してみた

Multipath Resilience を、N. Virginia と Oregon 間の VPC ピアリングと Transit Gateway ピアリング attachment で有効化しました。requester と accepter の両側が許可すると MultipathResilienceStatus が enabled になり、作成時に指定しても有効化できました。
2026.11.18

はじめに

2026年11月17日に、クロスリージョン通信に 99.999% の可用性 SLA を付ける Multipath Resilience が発表されました。

https://aws.amazon.com/jp/about-aws/whats-new/2026/11/vpc-tgw-cloudwan-99999-sla/

Multipath Resilience を有効にすると、各パケットのコピーが物理的に分離された複数の経路へ送られ、宛先リージョンでは最初に届いたパケットが渡され、後から届いた重複は破棄されます。

この記事では、N. Virginia(us-east-1)と Oregon(us-west-2)の間の Transit Gateway(TGW)ピアリング attachment と VPC ピアリングで、Multipath Resilience の有効化を試しました。

検証環境

  • AWS CLI:2.41.0
  • リージョン:us-east-1(requester 側)、us-west-2(accepter 側)
  • アカウント:requester 側と accepter 側で同一

TGW ピアリング attachment

us-east-1 と us-west-2 に TGW を1つずつ作成した状態から始めます。attachment の requester は us-east-1、accepter は us-west-2 です。

有効化前の状態

options を指定せずに作成して accept した attachment を describe すると、Options に Multipath Resilience の項目が出ます。

aws ec2 describe-transit-gateway-peering-attachments --region us-east-1 --transit-gateway-attachment-ids tgw-attach-0123456789abcdef0
"Options": {
    "RequesterAllowMultipathResilience": false,
    "AccepterAllowMultipathResilience": false,
    "MultipathResilienceStatus": "disabled"
}

options なしで実行した create の応答と accept の応答には、Multipath Resilience の項目が出ませんでした。accept 応答の Options は DynamicRouting のみでした。

既存の attachment で有効化する

modify-transit-gateway-peering-attachment を requester 側(us-east-1)、accepter 側(us-west-2)の順に実行します。まず requester 側です。

aws ec2 modify-transit-gateway-peering-attachment --region us-east-1 --transit-gateway-attachment-id tgw-attach-0123456789abcdef0 --options AllowMultipathResilience=true

応答の Options は次のとおりです。指定したのは AllowMultipathResilience=true だけですが、RequesterMultipathResilienceMode には always-on が入りました。

"Options": {
    "RequesterAllowMultipathResilience": true,
    "RequesterMultipathResilienceMode": "always-on",
    "AccepterAllowMultipathResilience": false,
    "MultipathResilienceStatus": "pending"
}

この時点では、どちらのリージョンから describe しても MultipathResilienceStatus は pending でした。続けて accepter 側です。

aws ec2 modify-transit-gateway-peering-attachment --region us-west-2 --transit-gateway-attachment-id tgw-attach-0123456789abcdef0 --options AllowMultipathResilience=true

この modify の応答でも MultipathResilienceStatus は pending でした。約14秒後の describe では enabled になっていました。

aws ec2 describe-transit-gateway-peering-attachments --region us-east-1 --transit-gateway-attachment-ids tgw-attach-0123456789abcdef0 --query TransitGatewayPeeringAttachments\[0\].\[State\,Options\]
[
    "available",
    {
        "RequesterAllowMultipathResilience": true,
        "RequesterMultipathResilienceMode": "always-on",
        "AccepterAllowMultipathResilience": true,
        "AccepterMultipathResilienceMode": "always-on",
        "MultipathResilienceStatus": "enabled"
    }
]

既存の attachment を modify で有効化している間、State は available のままです。切り替わりを示すのは MultipathResilienceStatus だけです。

作成時に有効化する

create-transit-gateway-peering-attachment の options に AllowMultipathResilience=true を指定します。

aws ec2 create-transit-gateway-peering-attachment --region us-east-1 --transit-gateway-id tgw-0123456789abcdef0 --peer-transit-gateway-id tgw-0fedcba9876543210 --peer-account-id 111122223333 --peer-region us-west-2 --options AllowMultipathResilience=true
"Options": {
    "RequesterAllowMultipathResilience": true,
    "RequesterMultipathResilienceMode": "always-on",
    "AccepterAllowMultipathResilience": false,
    "MultipathResilienceStatus": "pending"
}

同一アカウントの接続では、accepter 側で modify を実行せず accept しただけで、AccepterAllowMultipathResilience が true、MultipathResilienceStatus が enabled になりました。

accept から requester 側で available と enabled を確認するまでは約3分23秒でした。options なしの attachment は約3分15秒で、10〜15秒間隔の確認では差を読み取れませんでした。

Console での表示

attachment 詳細のトポロジー図で、Attachment available の下の表示が Multipath resilience disabled から enabled に変わります。画像は requester 側(us-east-1)の画面です。State や Dynamic routing など詳細欄の項目は有効化の前後で同じです。

有効化前の attachment 詳細。トポロジー図に Multipath resilience disabled と表示されている

有効化後の attachment 詳細。トポロジー図に Multipath resilience enabled と表示されている

VPC ピアリング

us-east-1 と us-west-2 に VPC を1つずつ新規に作り、その間にピアリング接続を作成しました。requester は us-east-1、accepter は us-west-2 です。

既存の接続で有効化する

options を指定せずに作成して accept した接続(Status は active)で有効化します。有効化前と両側の許可後で describe の結果を比べると、次の項目が変わりました。

項目 有効化前 両側許可後
MultipathResilienceStatus disabled enabled
requester 側の AllowMultipathResilience false true
accepter 側の AllowMultipathResilience false true
MultipathResilienceMode 項目なし always-on

requester 側は --requester-peering-connection-options で指定します。accepter 側は --accepter-peering-connection-options で指定します。

aws ec2 modify-vpc-peering-connection-options --region us-east-1 --vpc-peering-connection-id pcx-0123456789abcdef0 --requester-peering-connection-options AllowMultipathResilience=true
aws ec2 modify-vpc-peering-connection-options --region us-west-2 --vpc-peering-connection-id pcx-0123456789abcdef0 --accepter-peering-connection-options AllowMultipathResilience=true

requester 側だけが許可した状態では、どちらのリージョンから describe しても MultipathResilienceStatus は pending でした。accepter 側の modify の約11秒後に describe した結果は次のとおりです。

aws ec2 describe-vpc-peering-connections --region us-east-1 --vpc-peering-connection-ids pcx-0123456789abcdef0 --query VpcPeeringConnections\[0\].\[Status.Code\,MultipathResilienceStatus\,RequesterVpcInfo.PeeringOptions\,AccepterVpcInfo.PeeringOptions\]
[
    "active",
    "enabled",
    {
        "AllowDnsResolutionFromRemoteVpc": false,
        "AllowEgressFromLocalClassicLinkToRemoteVpc": false,
        "AllowEgressFromLocalVpcToRemoteClassicLink": false,
        "AllowMultipathResilience": true,
        "MultipathResilienceMode": "always-on"
    },
    {
        "AllowDnsResolutionFromRemoteVpc": false,
        "AllowEgressFromLocalClassicLinkToRemoteVpc": false,
        "AllowEgressFromLocalVpcToRemoteClassicLink": false,
        "AllowMultipathResilience": true,
        "MultipathResilienceMode": "always-on"
    }
]

接続の状態を示す Status.Code は、有効化の前後とも active です。

作成時に有効化する

create-vpc-peering-connection の --requester-peering-connection-options に、AllowMultipathResilience=true を指定します。

aws ec2 create-vpc-peering-connection --region us-east-1 --vpc-id vpc-0123456789abcdef0 --peer-vpc-id vpc-0fedcba9876543210 --peer-region us-west-2 --requester-peering-connection-options AllowMultipathResilience=true

create の応答の MultipathResilienceStatus は pending です。同一アカウントの接続では、accepter 側で modify を実行せずに accept しただけで、その応答の時点で accepter 側の AllowMultipathResilience が true になっていました。MultipathResilienceStatus も enabled になっていました。

aws ec2 accept-vpc-peering-connection --region us-west-2 --vpc-peering-connection-id pcx-0abcdef0123456789 --query VpcPeeringConnection.\[Status.Code\,MultipathResilienceStatus\,AccepterVpcInfo.PeeringOptions\]
[
    "provisioning",
    "enabled",
    {
        "AllowDnsResolutionFromRemoteVpc": false,
        "AllowEgressFromLocalClassicLinkToRemoteVpc": false,
        "AllowEgressFromLocalVpcToRemoteClassicLink": false,
        "AllowMultipathResilience": true,
        "MultipathResilienceMode": "always-on"
    }
]

この応答の時点では Status.Code が provisioning で、accept の約11秒後の describe で active になっていました。

TGW ピアリングとの API の違い

TGW ピアリングと VPC ピアリングでは、応答に含まれる項目の位置と、modify で使う引数が異なります。

TGW ピアリング attachment VPC ピアリング
MultipathResilienceStatus Options の中 接続の最上位
許可フラグ Options の中 各側の PeeringOptions の中
modify の引数 --options --requester-peering-connection-options、--accepter-peering-connection-options
modify の応答の MultipathResilienceStatus あり(pending) なし
accept の応答の MultipathResilienceStatus なし あり

対応範囲と SLA

対象は、クロスリージョンの VPC ピアリング、TGW ピアリング attachment、Cloud WAN の通信です。使えるリージョンは N. Virginia、Ohio、N. California、Oregon、Ireland です。

SLA は、AWS バックボーンの部分について、Network Path(片方向の通信)ごとに Qualifying Minute を対象に測定されます。Qualifying Minute は、1分あたり 250,000 パケット以上で、かつ 1 Gbps を超えるフロー(5-tuple)を含まない分です。

https://aws.amazon.com/vpc/features/vpc-multipath-resilience/sla/

料金

有効化した接続から別リージョンへ送信したデータに、GB 単位の料金がかかります。この料金は、リージョン間データ転送料金に上乗せして請求されます。受信したデータには Multipath Resilience の料金がかかりません。VPC の料金ページの表では、単価は次の2通りです。

  • N. Virginia と Ohio の間:$0.015/GB
  • そのほかのリージョンの組み合わせ(us-east-1 と us-west-2 の間を含む):$0.03/GB

TGW ピアリングでは、Multipath Resilience の料金に加えて、TGW の料金もかかります。

  • TGW ピアリング attachment の時間料金:$0.05/時。ピアリングした両側の TGW の所有者それぞれに請求されます
  • TGW のデータ処理料金:$0.02/GB。VPC から TGW へ送ったデータに課金されます

https://aws.amazon.com/vpc/pricing/

https://aws.amazon.com/transit-gateway/pricing/?nc2=type_a_pricing

まとめ

Multipath Resilience が、北米4リージョンとアイルランドで利用可能になりました。

AWS Transit Gateway の SLA は、月間の稼働率で、複数 AZ に配置した TGW が 99.99%、それ以外が 99.9% です。Multipath Resilience を有効にしたクロスリージョンの TGW ピアリング接続は、日次の稼働率 99.999% の SLA で利用できます。TGW などのネットワーク接続に、より高い可用性と信頼性が求められる場合の選択肢が増えました。

Multipath Resilience の利用には、送信データに対して $0.03/GB(N. Virginia と Ohio の間のみ $0.015/GB)の料金がかかります。対象リージョンで、この料金に見合う可用性が必要な場合に、導入を検討してください。

GA 時点では東京リージョンが対象外でしたが、Multipath Resilience のサポートリージョンに加わるのを待ちたいと思います。

この記事をシェアする

AWSのお困り事はクラスメソッドへ

関連記事